PROGRAMMING SOMFY REMOTES – ADDING A NEW REMOTE OR OPERATING CHANNEL

  • 1810632 Telis 1 RTS Pure
  • 1810633 Telis 5 RTS Pure
  • 1810639 Telis 1 RTS Silver
  • 1810641 Telis 5 RTS Silver
  • 1810650 Telis 1 RTS Lounge
  • 1810652 Telis 5 RTS Lounge
  • 1810643 Telis 1 RTS Patio
  • 1810645 Telis 5 RTS Patio

A previously programmed remote can be used in order to add a new remote or channel to the Motorized Window Covering. If a Telis Transmitter has not been previously programmed, please refer to the installation instructions of the relevant RTS motorized window covering.

Adding a Telis 1 RTS Transmitter only:

1. Using the previously programmed Telis remote, press and hold the programming button on back of remote until
window covering “jogs.”

Telis

2. Using the new Telis 1 remote, briefly press the programming button until the window covering “jogs.” Window covering has now learned the commands of the new Telis remote.

Adding a Telis 5 RTS Transmitter only:

1. Using the previously programmed Telis remote, press and hold the programming button on back of remote until window covering “jogs.”

2. Using the new Telis 5 remote, select the desired channel using the CHANNEL SELECTOR BUTTON. (The LED will illuminate each time the Channel Selector Button is pressed, indicating the selected channel)

3. Using the Telis 5 remote, briefly press the programming button until the motorized window covering “jogs”. The RTS motorized window covering has now learned the commands of the new Telis 5 remote.