garage door installation tillsonburg

commercial doors in tillsonburg

Program the Travel Limits
Travel limits regulate the points at which the door will stop when moving up or down.

Adjust the position of the door by using the black and yellow buttons. Black moves the door UP (open) and yellow moves the door DOWN (close).

NOTE: The yellow command LED and the red learn LED will blink quickly for up to
5 minutes as the control panel recharges. When the control panel is operational, the yellow command LED will glow steadily.

SETTING THE UP POSITION:

  1. Press and hold the black button until the LED starts flashing slowly, then release.
  2. Push and hold the black button until the door reaches the desired UP (open) position. NOTE: Make sure the door opens high enough for your vehicle.
  3. Push the door control or programmed remote control. This sets the UP (open) limit and begins closing the door.
  4. Immediately when the door begins to close, press and release either the black or yellow button. This will stop the door.

commercial doors tillsonburg

SETTING THE DOWN POSITION:

  1. Push and hold the yellow button until the door reaches the desired DOWN (closed) position.
  2. Once the door is closed, if there appears to be too much pressure on the door, you may toggle the door back and forth using the black and yellow buttons to reach the desired closed position.
  3. Push the door control or programmed remote control. This sets the DOWN (close) limit and the door should open.

garage door installation in tillsonburg

Need Help setting up your operator?

tillsonburg commercial doors

tillsonburg garage door motors